Homeowners
One kitchen, one bathroom, one villa. You get the same estimator and the same fixing crew as a hotel client, and an hour in the warehouse gallery to make up your mind properly.
Marble & granite fabrication and installation across the UAE
Consulting, fabrication, installation, restoration and more — eight specialist services delivered by our own teams from our Sharjah workshop to sites in every Emirate.
Eight services
Everything a stone project needs, under one roof
Each service can be bought on its own. Most clients take two or three, and a few hand us the whole stone package from first sketch to handover.
Consulting & Design
Material boards and honest advice before you commit to a stone.
Natural Stone Fabrication
CNC cutting, edges and bespoke pieces made in our own workshop.
Natural Stone Installation
Flooring, walls and facades fixed by our own staff teams.
Water Jet Cutting
Cold-cut precision for medallions, inlays and curved shapes.
Book-Match Designing
Veining mirrored across the join for a seamless pattern.
Marble Polishing & Restoration
Diamond grinding and crystallisation for tired stone.
Marble Sealing & Protection
Impregnating sealers matched to porosity and location.
Moulding & Decorative Profiles
Skirting, cornices and carved profiles from a matched block.
Service 01
Consulting & Design
Before any slab is cut, we help you choose the right stone for the room, the light and the way it will actually be used. Material boards, side-by-side sample comparisons and straight advice from people who see how these choices age over years, not just under showroom lighting.
- Material boards with three to five realistic options per space
- Specification support for architects and interior designers
- Site assessment before you commit to a stone family
- Honest guidance on what to avoid, not just what to buy
Service 02
Natural Stone Fabrication
Every worktop, vanity and bespoke piece is cut, profiled and polished in our own Sharjah workshop — never subcontracted. Laser templating keeps tolerances tight, and a dry assembly on the bench catches problems before anything reaches site.
- CNC cutting, mitred waterfall edges, drainer grooves and sink cut-outs
- Solid-stone basins, vanity tops and carved reception desks
- Dry-assembly check of every joint before delivery
- Cut-to-size supply for contractors with their own installers
Service 03
Natural Stone Installation
Flooring, wall cladding and facade systems installed by our own staff fixing teams, not day-hire labour. We plan movement joints, layout and fixing method before the first slab is cut, which is why the installation date holds.
- Dry-lay approval and book-matched or vein-run floor layouts
- Mechanically fixed granite, limestone and porcelain facade systems
- Underfloor-heating-compatible build-ups and decoupling membranes
- Shop drawings and wind-load calculations for consultant approval
Service 04
Water Jet Cutting
Cold-cut precision for shapes a saw cannot make: medallions, inlays, curved returns, company logos and fine border details. Because the material is never heated, there is no thermal stress at the cut edge.
- Curved, radiused and irregular cuts to a supplied drawing
- Multi-stone inlay and medallion work
- Logos and bespoke motifs cut into floors or feature walls
- Fine tolerances for book-matched and mirrored panels
Service 05
Book-Match Designing
Slabs cut from the same block, opened like a book, so the veining mirrors across the join instead of clashing. Done well it reads as a single continuous pattern; done badly it is the first thing a visitor notices. We lay panels out dry before fixing so you approve the match, not just the stone.
- Full-height book-matched walls, vanities and reception fronts
- Dry-lay approval before any panel is fixed
- Block reservation so a matching set is never broken up
- Vein-run flooring layouts for a continuous, flowing floor
Service 06
Marble Polishing & Restoration
Most “ruined” marble is not ruined. Etching, dullness and traffic lanes come back with diamond grinding and crystallisation, and we would rather restore a floor than sell you a new one.
- Diamond grinding, honing, polishing and crystallisation
- Etch and stain removal, poultice treatment, chip and crack repair
- On-site restoration — no need to vacate the space
- Annual maintenance contracts for hotels, offices and retail
Before
After
Drag the handle — typical results from a diamond grinding and crystallisation visit.
Service 07
Marble Sealing & Protection
Humidity, salt air and hard water are hard on natural stone in this climate. An impregnating sealer applied on schedule is the difference between a floor that ages gracefully and one that stains at the first spilled coffee.
- Impregnating sealer application with a written re-seal schedule
- Sealing advice matched to porosity, finish and location
- Protection for kitchens, bathrooms, pool surrounds and facades
- Aftercare visit around six months after installation
Service 08
Moulding & Decorative Profiles
Skirting, cornices, balustrades, arches and carved profiles produced from a single matched block rather than assembled from short lengths, so the veining runs true around a room.
- CNC and hand-carved mouldings, skirting and cornices
- Balustrades, columns and arched surrounds
- Profiled thresholds, sills and copings
- Matched-block runs so veining stays consistent
Who we work with
Three ways people buy stone from us
Contractors & fit-out
Dedicated trade accounts, stock reservations, complete submittal packs and phased deliveries to match your programme.
Architects & designers
Sample boxes, CAD-ready slab dimensions, technical data for specification writing, and a standing invitation to mark slabs yourself with chalk.
The process
What happens after you call us
No stage starts before the previous one is signed off, which is why our installation dates hold.
01
Enquiry & site visit
Free across Dubai, Sharjah and Ajman, usually within 48 hours.
02
Material board & quote
Three to five shortlisted stones with an itemised written quotation and a lead time for each.
03
Slab selection
You choose and chalk-mark the actual slabs at our Sharjah warehouse. They are tagged and reserved.
04
Template & shop drawings
Laser measurement on site; drawings issued for your approval before cutting.
05
Fabrication & dry assembly
CNC cutting, edges, polishing and a bench check of every joint.
06
Install, seal, hand over
Fixed, sealed, cleaned, with a care sheet — and a free inspection at six months.
Service questions
Practical answers
Both. Most of our work is supply and install with our own fixing teams. If you have your own installers we are happy to supply cut-to-size material with a shop drawing, and we will still template it for you if you prefer.
Regularly. We coordinate directly with the cabinet maker on template date, sink and hob models, overhang dimensions and support requirements, so nobody is waiting on anybody.
Yes. Annual maintenance contracts for hotels, offices and retail spaces cover scheduled cleaning, re-sealing and inspection visits, so problems are caught before a guest or tenant ever notices them.
Yes. We issue material data sheets, origin certificates, flexural and absorption test results, anchor calculations and shop drawings as a single submittal pack, and we attend technical meetings when a consultant wants to interrogate the system.
Workmanship: fixing failure, joint separation, lippage beyond tolerance and anchor defects on work we installed. It does not cover impact damage, etching from acidic cleaners, or movement caused by structural or substrate failure outside our scope.
Ready when you are
Book a free site visit anywhere in the UAE
We measure, photograph and advise at no cost and with no obligation. You get a written quotation within 48 hours of the visit.